Installation of the banner, installation and dismantling of outdoor advertising

Installation of a banner

Installation of a banner is the installation of an advertising sheet with preliminary preparation of the fixing structure on the facade of the building or a special advertising platform.

How is the installation of the banner

Installation of the banner begins with the preparation of the place of fasteners.

Types of mounting systems for outdoor advertising.

Fixing systems of banners can be divided into three types: frame, cable, dowel

A brief description of the procedure for the installation / disassembly of the mounting structure.

– Mounting the banner on the frame structure (large banners):

• metal frame production;
• production and fastening of mortgages (if composite facade);
• mounting the frame on the facade;

Advantages of mounting the banner on the frame structure: the image of the mortgage banner

– it is easy to mount a banner cloth;

– easy to pull;

– stable stiffness;

– durability;

– constant change of banners does not affect the strength and wear;

Disadvantages:

– not cheap;

– time-consuming installation of the structure.

– Fastening the banner on the cable construction (medium banners):

• mounting brackets if necessary;
• installation of the cable on the facade for mounting outdoor advertising;
• cable tension

Advantages of mounting the banner on the cable construction:

– quick installation of the hinge system;

– inexpensive;

Disadvantages:

– it is strongly subject to temperature fluctuations;

– due to temperature fluctuations, the fastening system becomes unusable faster;

– during the summer period, a tightening may be required if the banner was mounted in winter;

– wind gusts create additional vibrations, which stretches the design.

– Installation of a banner on dowels (nails, rings, hooks) (small banners):

• installation of dowels;

Advantages of mounting the banner on the dowel:

– cheap;

– quick installation of the banner (if not the ring);

Disadvantages:

– short-lived: with a frequent change of banners, dowels will quickly become unusable;

– many holes in the facade (heat resistance is disturbed, wear is accelerated);

– when changing a banner, fasteners and eyelets usually do not match.

Usually the banner is mounted by lacing through eyelets. Eyelets are special holes around the perimeter of the banner. Sometimes the banner is mounted on the pipe through special pockets around the perimeter of the banner.

Next, the banner is printed taking into account the indents from the mounting structure at least 8 cm from each edge. If the banner is not large, you can leave 5 cm on each side for indents.

Indents are necessary for a banner of high quality, otherwise it will be impossible to provide sufficient tension, which will inevitably lead to waves on the banner and a poor-quality type of your advertisement.

Installation and dismantle of outdoor advertising

Installation and dismantling of outdoor advertising is the fixing of advertising structures outside: citylights, signs, signs, signs in various places – on facades, trees, billboards, roofs, above the entrance / exit, shop windows and other places.

We provide services for installation / dismantling of banners / outdoor advertising of any complexity: from frame production to tension. The installation of outdoor advertising is guaranteed from 1 year. If the banner went in waves, then we will pull it up for free. However, if we did all the work from the beginning to the end, then this, as a rule, does not occur.

Departure of the expert on measurement free of charge.