СК Паук > Facade work > The thermal insulation of apartments, houses, offices

The thermal insulation of apartments, houses, offices

The thermal insulation of apartments, houses, offices – is an increase in the thermal stability of external walls due to plating them with foam, polystyrene foam or mineral wool. The article “The better to insulate” will help you decide on the choice of insulation materials.

The benefits of thermal insulation or what you get as a result

  • This is a way to improve the internal climate of housing, make it as comfortable as possible for living due to the right balance of temperature and humidity. In your house it will become warmer in the autumn-winter period and cooler in the summer.

  • Thermal insulation will save up to 40% of funds for heating housing or office space in winter, as well as air conditioning in the summer.

  • Thermal insulation will save your housing from external cracks and leaks of panel joints.

  • The walls covered with a heater receive the increased term of operation due to their protection from adverse atmospheric phenomena. Your housing will become more durable.

  • Your house or office will have an updated, attractive look. Here you can choose any color of the facade.

  • Most likely you will recommend warming your home to your friends and acquaintances, because the heat is worth your money.

  • Thermal insulation of housing is a foresight, the ability to count money and take care of one’s health.

The technology of performance of works on the thermal insulation

  • The wall is cleaned of dust and primed (if necessary).
  • Sheets of insulation are attached to the glue-foam or mortar mixture to the wall.
  • Sutures wider than 2 mm wide are filled with polyurethane foam.
  • In addition, the heater is fixed with plastic dowels of not less than 5 pieces per 1 m2. The dowels are “drowned” in a styrofoam in a level with a common surface, after which they are covered with a reinforcing mixture.
The first steps of wall insulation technology
The next steps of wall insulation technology
  • The reinforcing layer is applied in 2 mm, then the alkali-resistant facade glass grid with a density of at least 160 g / m2 with an overlap of not less than 10 cm is welded into it.
  • Perforated aluminum corners with a grid for additional strengthening and aesthetics are installed on the corners and slopes of the windows.
  • A protective layer is set up with a reinforcing mixture of at least 2 mm thickness.
  • The whole surface is covered with priming paint with quartz sand.
  • Installed ebbs on the outer sills and over the insulation.
  • The walls are painted with acrylic water-based matte paint, after which the surface takes the form as close as possible to the general facade paint.
  • Slopes are insulated in series in the same order and are counted separately for the running meter.

Video about insulation technology from our suppliers

Industrial climber

The work is usually carried out using industrial mountaineering techniques, since it is economically more profitable than scaffolding. Our specialists have certificates allowing them to perform high-altitude work, which means that the safety of the work is at a high-priority level.

Contract

We necessarily conclude an agreement with each client, where we clearly describe the technology of the work, the square, the floor, the fixed cost of work with materials, as well as the obligation to remove construction debris. You can see the contract example on the “Guarantees” page.

At the conclusion of the contract we take an advance payment of 50% of the contract amount for the purchase of materials.

Waranty

The guarantee for the work performed is indicated in the contract and is usually from one to five years.

With us, you can pay by cash or non-cash ways.

We do not cooperate with intermediaries – we are direct executors.

Discount

With a volume of more than 30 square meters. discount is 5%.

The balcony is insulated at a price 30% higher than the price for 1 square meter of the usual thermal insulation.

The minimum volume for which we take is 20 sq.m. We do not mind taking on a smaller amount, but at a cost it will be equivalent to 20 sq.m.

Free

To assess the work we leave for FREE, just call us and agree on the time of the meeting.

 

    Prices for 2020
Thermal insulation
Thermal imaging examination of the apartment from 1000 UAH
Window jambs: 250 UAH per meter linear (with material) or do not subtract the area of windows from the total area of insulation.
Balconies: +200 UAH to the cost per square meter of insulation.
The prices are indicated for a volume calculation of up to 30 sq.m., if the volume is more, the discount is from 3% to 10%
Minimum order for insulation = 20 000 UAH,

including the cost of materials, this is 30 sq.m. + jambs of two windows. Unite with neighbors – get a 5% discount

The cost of thermal insulation includes: materials, the ebb over insulation, replacement of window ebbs. Finish works – painting.

Thermal insulation of foam plastic thickness of 50 mm

including the cost of materials,

Warranty – 5 years

Name Measure Price
Thermal insulation of facades “Standart” 50mm sq.m. 600 UAH
Thermal insulation of facades “Standart” 50mm – materials of Ukrainian manufacture “Stolit” sq.m. 650 UAH
Thermal insulation of facades “Optimus” 50 mm –  “RedBag” mixtures sq.m. 700 UAH
Thermal insulation of facades “Premium” 50 mm – materials of the Swiss brand “Baumit” sq.m. 750 UAH
Thermal insulation of facades “Maximum” 50 mm – all of materials from “Ceresit”, except for a heater sq.m. 800 UAH
thickness of 100 mm
Thermal insulation of facades “Econom” 100 mm sq.m. 675 UAH
Thermal insulation of balconies and loggias “Econom” 100 mm sq.m. 875 UAH
Thermal insulation of facades “Standart” 100 mm sq.m. 700 UAH
Thermal insulation of balconies and loggias “Standart” 100 mm sq.m. 900 UAH
Thermal insulation of facades “Optimus Prime” 100 mm sq.m. 750 UAH
Thermal insulation of balconies and loggias “Optimus Prime” 100 mm sq.m. 950 UAH
Thermal insulation of facades “Premium” 100 mm sq.m. 800 UAH
Thermal insulation of balconies and loggias “Premium” 100 mm sq.m. 1000 UAH
Thermal insulation of facades “Maximum” 100 mm sq.m. 900 UAH
Thermal insulation of balconies and loggias “Maximum” 100 mm sq.m. 1100 UAH

Thermal insulation of stone wool thickness 50 mm,

including the cost of materials,

Warranty – 5 years

Thermal insulation of stone wool “Standart” 50 mm sq.m. 800 UAH
Thermal insulation of stone wool “Premium” 50 mm sq.m. 950 UAH
Thermal insulation of stone wool “Maximum” 50 mm sq.m. 1150 UAH
thickness of 100 мм
Thermal insulation of stone wool “Standart” 100 mm sq.m. 1000 UAH
Thermal insulation of balconies and loggias with stone wool “Standart” 100 mm sq.m. 1200 UAH
Thermal insulation of stone wool “Premium” 100 mm sq.m. 1200 UAH
Thermal insulation of balconies and loggias with stone wool “Premium” 100 mm sq.m. 1400 UAH
Thermal insulation of stone wool “Maximum” 100 mm sq.m. 1300 UAH
Thermal insulation of balconies and loggias with stone wool “Maximum” 100 mm sq.m. 1500 UAH
Thermal insulation with extruded polystyrene foam
Thermal insulation with extruded polystyrene foam “PENOBOARD” 50 mm sq.m. 700 UAH

 

More information about high-rise works and prices for other services you can find on the page Facade work

Send us an application with photos of the object in Viber to number  066-555-44-33  and we will immediately call you back.